|
Product Code: G3911 |
Tackle hard-to-reach areas with ease and ensure complete soap
coverage, reducing the risk of wash-induced scratches and swirl
marks throughout the wash process.
The AMSOIL Foam Cannon
produces thick, clinging layers of suds to lift dirt and is built
with premium components designed to last and improve the washing
experience.
Its wide-mouth, wide-base design ensures easy
filling and stability.
- Superior Absorbency – Dry a standard-size vehicle with a
single towel
- Rapid Drying – Twist-loop weave rapidly picks up and
retains water
- Gentle on Surfaces –70/30 microfiber blend with hemmed
edge prevents scratching
- Low Maintenance – Machine washable
- 25” x 36” 1100 GSM
Care Instructions: Wash prior to first use for best
results. Wash with like colors as some colors may bleed. Machine
wash warm with mild liquid detergent (free of dyes, fragrances,
bleach and softeners). Do NOT use any fabric softener or chlorine
bleach. Wash only with other non-linting materials to maintain
proper dirt-gripping properties. If your washer has an extra rinse
cycle, use it to remove as much contamination and soap from the
towels as possible. Tumble dry on low, and do NOT iron. Air or line
drying is also an option in a dust free space.
Directions for Foam Cannon:
- Follow all instructions and safety guidelines for your
specific pressure washer.
- For optimum results, mix 2 oz. of AMSOIL High-Foam Car
Shampoo with fresh or deionized water in the AMSOIL Foam Cannon
reservoir.
- Before connecting the reservoir to the spray nozzle, ensure
the hose tube is attached to the fitting located on the
underside of the nozzle.
- Ensure proper connection to your pressure washer.
- Adjust soap dilution ratio by turning the valve located on
top of the nozzle.
- Adjust the spray pattern by twisting the gray end of the
nozzle.
- Adjust the spray orientation by twisting the black section
of the nozzle.
- Pull the pressure washer trigger and spray the entire
vehicle in sweeping motions, until full foam coverage is
achieved.
- Allow the foam to sit on the vehicle for a few minutes to
break down dirt and grime, lifting contaminants to the surface.
Do not let it dry.
- For optimum results, use the AMSOIL Wash Mitt to gently
scrub the vehicle’s surface.
- Once the foam has loosened the contaminants, rinse off with
the pressure washer starting from the top and working your way
down.
|
