last 20 years have brought many changes and advancements in the
automotive world. Much smaller engines are producing speeds 50 percent
faster. Modern engines burn leaner, run hotter, have higher compressions
and use smaller radiators and oil sumps. The demand for more power and
performance out of significantly smaller engines has created a need for
an oil that will perform as well as today’s cars. Oil drain intervals
have increased as much as 300 percent in engines with better fuel
economy and fewer emissions than ever before. AMSOIL has been on the
forefront of lubrication technology for over 30 years, developing and
producing products that have changed the industry. As The First in
Synthetics®, AMSOIL is continually striving to make the best
high-performance lubricants available.
AMSOIL, the leader in automotive synthetic lubrication, produced the
world’s first API-qualified synthetic motor oil in 1972. Trust the
extensive experience of AMSOIL The First in Synthetics® to do the
best job protecting your engine.
motor oils are the right choice for contemporary performance vehicles.
Take a look at the facts:
synthetic motor oils are pure and molecularly uniform. Every single
molecule in AMSOIL synthetic motor oils is dedicated to engine
lubrication and protection. Conventional motor oils contain
non-essential molecules that do virtually nothing to protect the engine,
and contain elements that actually harm it.
synthetic motor oils are formulated to exceed the most demanding
world-wide performance specifications, and are recommended for all
domestic and imported passenger car and truck engines.
synthetic motor oils reduce friction more effectively than conventional
petroleum motor oils do. Less friction means less engine wear, better
fuel economy and improved power and performance.
synthetic motor oils inhibit the formation of sludge, varnish, acids and
other harmful deposits. Engines stay cleaner, perform better and last
synthetic motor oils do not burn off like conventional petroleum motor
oils do. AMSOIL synthetic motor oils retain their viscosity, providing
reduced oil consumption, improved fuel economy and better wear
synthetic motor oils remain fluid in the cold temperatures that gel
conventional petroleum oils. With AMSOIL synthetic motor oils, engines
start easier and are assured immediate start-up protection.
Race Teams, Series, and Events
Dominator® 5W-20 Racing
Dominator® Synthetic 5W-20 Racing Oil (RD20) provides superior
performance and maximum protection in high-performance and racing
applications. Formulated to withstand the elevated RPM, high
temperatures and shock-loading common to racing applications,
Dominator Synthetic 5W-20 Racing Oil
delivers superior performance
and maximum protection in extreme conditions. Its shear-stable
formulation was engineered to provide maximum horsepower without
sacrificing engine protection. Dominator Synthetic 5W-20 Racing Oil
provides straight-grade protection in a multi-grade formulation.
.Dominator® 10W-30 Racing Oil
Synthetic 10W-30 Racing Oil (RD30) provides superior performance and
maximum protection in high-performance and racing applications.
Formulated to withstand the elevated RPM, high temperatures and
shock-loading common to racing applications, Dominator Synthetic 10W-30
Racing Oil delivers
superior performance and maximum protection in extreme conditions. Its
shear-stable formulation was engineered to provide maximum horsepower
without sacrificing engine protection. Dominator Synthetic 10W-30 Racing
Oil provides straight-grade protection in a multi-grade formulation.
Dominator® 15W-50 Racing
Synthetic 15W-50 Racing Oil (RD50) provides superior performance and
maximum protection in high-performance and racing applications.
Formulated to withstand the elevated RPM, high temperatures and
shock-loading common to racing applications, Dominator Synthetic 15W-50
Racing Oil delivers superior performance and maximum protection in
extreme conditions. Its shear-stable formulation was engineered to
provide maximum horsepower without sacrificing engine protection.
Dominator Synthetic 15W-50 Racing Oil provides straight-grade protection
in a multi-grade formulation.
the leader in automotive synthetic lubrication, produced the world’s
first API-qualified synthetic motor oil in 1972. Trust the extensive
experience of AMSOIL The First in Synthetics® to do the best job
protecting your engine.
Synthetic Racing Oil
Synthetic Super Heavy Weight Racing Oil (AHR) is a high-viscosity
oil designed for high-horsepower racing engines, typically
supercharged and alcohol-burning or nitro-fueled, requiring a
high-viscosity oil to resist the thinning effects of fuel dilution. AMSOIL
Synthetic Super Heavy Weight Racing Oil is formulated specifically
for wear protection and friction reduction in the extreme conditions
of racing. It is race proven and reduces friction, promotes power
and inhibits wear.
Break In Oil
Break-In Oil is an SAE 30 viscosity grade oil formulated without
friction modifiers to allow for quick and efficient piston ring
seating in new and rebuilt high-performance and racing engines. It
contains zinc and phosphorus anti-wear additives to protect cam
lobes, lifters and rockers during the critical break-in period when
wear rates are highest, while its increased film strength protects
rod and main bearings from damage. AMSOIL Break-In Oil is designed
to increase compression, horsepower and torque for maximum engine
Oil and Air Filters
Ea Oil Filters
AMSOIL Ea Oil Filters offer the highest efficiency rating in the industry.
Their small synthetic nanofibers trap smaller particles and hold
more contaminants, resulting in lower restriction. AMSOIL EaO
Filters have a far greater capacity than competing filter lines.
When used in conjunction with AMSOIL Ea15K
Filters are guaranteed for up to 15,000 miles/one year, whichever
comes first, and EaO Filters are guaranteed for up to 25,000
miles/one year, whichever comes first, depending on application and
severity of service.
AMSOIL Racing Filters
Filters are specially designed for racing and street rod enthusiasts
who desire AMSOIL Ea protection in carbureted applications. AMSOIL EaAR Air Filters are constructed with the same synthetic nanofiber
media as other AMSOIL Ea Air Filters.
well-known around the world for its innovative filtration products
for the automotive and light truck market. Founded in 1939, the
Gastonia, N.C., company earned acclaim during World War II when it
created an oil filter out of a paper tube, wooden plugs and yarn
when steel was in short supply. In 1954 WIX created the
revolutionary spin-on oil filter that was eventually adopted as
original equipment on most vehicles.
manufactures some of the best oil, air, lube, cabin air, hydraulic,
fuel, crank case breather and transmission filtration products on
the market. The company is also widely known for its support of
Severe Gear EP Gear Lube
AMSOIL Severe Gear
Synthetic Extreme Pressure (EP) Lubricants (SVO, SVT, & SVG) are
premium grade lubricants specifically engineered for maximum
performance in severe duty applications. Severe Gear features an
exclusive blend of high viscosity, shear-stable synthetic base oils
and an extra treatment of high-performance additives. AMSOIL Severe
Gear Synthetic EP Lubricants maintain their viscosity for
long-lasting protection against metal-to-metal contact. AMSOIL
Gear lubricants are designed to provide better performance
and excellent protection during temperature extremes.
Severe Gear SAE 190 & 250|
Gear Synthetic SAE 190 and
SAE 250 Gear Lubricants are premium grade, extreme pressure gear
lubes engineered specifically for the demands of severe racing
conditions. They are formulated with shear stable, heavy synthetic
base oils for “high film strength” and extra heavy treatments of
additives. Their synthetic formulations provide improved flow over
conventional oils, reducing viscous drag and power loss. Severe Gear
SAE 190 and
SAE 250 Gear Lubes provide a
barrier cushion between metal surfaces that absorbs impact. AMSOIL
proprietary extreme pressure
additives form an iron-sulfide barrier
coating on gear surfaces for the ultimate line of defense against
wear, pitting and scoring.
Automatic Transmission Fluid
AMSOIL Synthetic Automatic Transmission Fluid exceeds the
performance requirements for domestic and foreign automatic
transmission fluid applications, providing excellent lubricating
protection and better performance over a wider temperature range
than conventional automatic transmission fluids.
AMSOIL ATF resists thermal and oxidative degradation longer than
conventional transmission fluids,
protecting components from damaging sludge and varnish deposits,
preventing component overheating and ensuring cooler, smoother
transmission operation. AMSOIL ATF also offers substantially better
cold temperature fluidity than required by current automatic
transmission fluid specifications and provides easier starting, faster warm-ups, smoother shifting and improved fuel economy.
AMSOIL ATF provides smooth shifting and long, trouble-free transmission life for extended drain intervals. Transmissions usually operate under severe service conditions and are subjected to extensive idling, frequent short trips, cold temperature driving, sustained
weather driving or trailer towing. When conventional transmission fluid is used under severe service, it should be changed every 15,000 to 30,000
miles. AMSOIL ATF can go longer with change intervals up to 50,000 miles.
Super Shift® Racing Transmission
Synthetic Super Shift® Racing Transmission Fluid is specifically
formulated for automatic transmissions operating in high-horsepower
and high-torque conditions.
AMSOIL SuperShift contains top-quality
additives selected specifically for racing applications. Its
unmatched transmission friction performance provides high holding
capacity for maximum torque transfer and brake power, reduced wear
and longer clutch plate life. Super Shift virtually eliminates
slippage, promotes positive clutch engagement and improves overall
shift performance, helping racers improve on elapsed times. Formulated for High-Horsepower and High-Torque Applications
Synthetic Super Shift Racing Transmission Fluid is highly effective
against heat and wear, reducing transmission temperature and
minimizing or eliminating burned up transmissions. Its superior
oxidative and thermal stability inhibits the formation of varnish,
deposits and sludge so equipment runs clean. Super Shift acts as a
heat transfer fluid and by controlling clutch slippage it helps
reduce operating temperatures of hot transmissions by up to 50°F. In
Super Shift flows readily for dependable startup
and post-startup protection.
Manual Synchromesh Transmission Fluid
Synthetic Synchromesh Transmission Fluid is a premium quality
synthetic lubricant designed to surpass the most demanding
lubrication requirements of manual transmissions and transaxles
where non-extreme pressure fluids are used. MTF protects gears and
bearings in extreme temperatures. It outperforms conventional oils
and delivers outstanding performance from -40°F to 300°F. It
maximizes energy efficiency and resists the effects of heat,
oxidation, sludge and varnish deposits. Unlike its mineral oil
counterparts, MTF prevents the thinning effects of mechanical shear
for stable viscosity, superior film strength and anti-wear
performance. It protects against rust, keeps seals soft for long
life, and is compatible with brass synchros for smooth synchromesh
Synchromesh Transmission Fluid is a higher quality, lower cost
replacement for multiple vehicle manufacturer branded products. This
premium synthetic formulation provides enhanced anti-wear
protection and lasts longer in service. MTF exceeds the performance
requirements of both manual transmissions and transaxles.
Transmission and Transaxle Gear Lube
Synthetic Manual Transmission and Transaxle Gear Lube is a
premium blend of the finest synthetic base oils and advanced,
high-performance additives. It is formulated specifically for
maximum protection in the most demanding manual transmission and
transaxle applications where an extreme pressure GL-4 gear lube is
specified, including those where high horsepower/high torque engines
and towing or heavy loads increase transmission stress.
prevents the thinning effects of mechanical shear. It maintains its
viscosity and superior film strength for consistent, long-lasting
wear protection. MTG excels in hot and cold temperature extremes
that exceed the limits of conventional mineral oils. It protects
against rust, keeps seals soft for long life, and is compatible with
brass synchros for smooth synchromesh shift quality.
Ideal for NV-4500 Transmissions
MTG is a thermally stable, extreme pressure formulation that resists
heat, oxidation, acid build-up and varnish. It is the ideal gear
lube for high temperature applications, including the New Venture
NV-4500 transmission, which retains heat due to its cast iron
housing and is often
subjected to heavy loads and high torque from
2000 Racing Grease
AMSOIL Series 2000 Synthetic Lithium Complex
Racing Grease meets the highest performance
standards of the
National Lubricating Grease Institute, GC for wheel bearing
applications and LB for chassis applications.
protection for hard-driven, high performance vehicles. Dramatically
reduces friction and wear for improved performance. Excels at both
high- and low-temperature performance. Outperforms other
conventional and synthetic greases.
consistency grade of AMSOIL Synthetic Multi-Purpose Grease is
recommended in heavy and light duty applications found in
manufacturing plants, automobiles, agricultural and construction
but are not limited to, roller bearings, plain bearings, thrust
bearings, gears, electric motors, presses, winches, bushings, wheel
bearings, chassis lubrication, universal joints, ball joints,
tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose
Greases are suitable for use up to 350 degrees F. When operating at
elevated temperatures, frequent regreasing may be required.
AMSOIL Synthetic Water Resistant Grease is an extreme-pressure,
multipurpose grease formulated specially for wet-duty performance.
Its water washout
spray off resistance are ideal for wheel
bearings of vehicles and trailers frequently exposed to water, mud,
snow or ice. It is also excellent for use in plants, such as paper
mills, in which machinery undergoes frequent or prolonged exposure
Pi Performance Improver
Pi Performance Improver (API) is the most potent gasoline additive
available today. As a concentrated detergent, it is unsurpassed in
cleaning combustion chamber deposits, intake valve deposits and port
fuel injector deposits, eliminating the need for expensive fuel
injector cleaning procedures. It is ideal for use prior to
emissions inspections, and it helps maintain peak engine efficiency,
fuel economy, power and drivability in newer low mileage engines.
In engines with accumulated deposits, PI provides improved
mileage up to 5.7%, reduced emissions, restored power and performance, reduced need for higher octane fuel, reduced carbon rap
and preignition, better drivability and smoother operation after
only one tank of gasoline.
Series 2000 Octane Boost
Maximizes power and improves performance in all two-cycle and
four-cycle gasoline engines. Increases octane number up to seven
points. Reduces engine knock, improves ignition and engine response,
helps fuel burn cleaner and inhibits corrosion. Recommended for
off-road and racing use.
Maintenance & Accessory Products
AMSOIL Power Foam improves starting and increases fuel efficiency. Power Foam penetrates and thoroughly cleans the engine’s intake system, freeing sticky valves, cleaning dirty spark plugs and removing gum, varnish and carbon deposits from exterior engine surfaces
Fast-Acting Equipment and Surface
AMSOIL Heavy-Duty Degreaser is
formulated with powerful and fast-acting solvents, attacking
petroleum-based grime on a molecular level to loosen its
hold on metal, concrete, engines and other surfaces. Its
active citrus formula makes cleaning easy and leaves a clean
MP Metal Protector
Protector are easy-to-use spray-on
products that protect metal surfaces, displace water and silence
squeaks. MP cuts through rust and corrosion to restore free movement
of “frozen” hardware parts. AMSOIL MP is
the product of choice for drying electrical and ignition systems and
protecting electrical equipment from freshwater and saltwater
damage. It contains no silicone.
Heavy Duty Metal
Heavy Duty Metal Protector is
the product of choice for metal surfaces that require a heavy duty
lubricant or are exposed to the damaging effects of salt, moisture
or chemical corrosion. It is ideal for hinges, wire ropes and
springs, nuts and bolts, motorcycle or bicycle chains, and for
undercoating wheel wells and other metal surfaces exposed to water,
dirt or road salt.
lubricating non-metallic surfaces that come into contact with metal,
nylon, cardboard, fiberglass, wood or plastic surfaces. Use anywhere
a light-duty or silicone lubricant is required. Special non-staining
formula. USDA H-1 rated for incidental contact with food. Excellent
for waterproofing leather boots, shoes, jackets, suede, etc.
Antifreeze and Engine Coolant
AMSOIL Propylene Glycol Antifreeze and Engine Coolant combines
biodegradability, low toxicity and all-climate protection. Being
that it is low toxicity limits the threat to children,
pets or wildlife. Its revolutionary
formulation provides maximum antifreeze and cooling protection in
the most extreme temperatures and operating conditions. AMSOIL
Antifreeze and Engine Coolant contains a proprietary poly-organic
acid technology that eliminates the need for periodic changing or
recharging of cooling systems. There is no need for supplemental
coolant additives. It provides extended service life in all gasoline
and diesel engines.
Dominator® Coolant Boost
Racers demand lower engine operating
temperatures in order to achieve maximum efficiency and horsepower
on the track, while the straight water coolant used by many racers
opens engines up to damaging radiator and water pump corrosion.
AMSOIL Dominator® Coolant Boost provides racers and motorists
with significantly lower engine operating temperatures, quicker
engine warm-up times and advanced corrosion protection. Dominator Coolant Boost is formulated with
proprietary tiered surfactant technology, providing quick and
effective heat transfer inside radiators and cylinder heads, which
results in reduced operating temperatures, more efficient operation,
increased horsepower and significantly reduced engine warm-up times
in cold weather. Coolant Boost also contains a robust mixture of
corrosion inhibitors that protect the radiator, heater core, water
pump, cylinder heads, engine block and intake manifold from the
damaging effects of corrosion
AMSOIL Engine and Transmission Flush
helps restore fuel economy, increase operating efficiency and reduce
emissions in gasoline and diesel engines, and automatic
transmissions. Its potent, detergent-based formula cleans sludge and
deposit build-up, promoting lower operating temperatures and reduced
oil consumption. AMSOIL Engine and Transmission Flush is safe on
parts and can be easily disposed of with waste oil.
Series 500 High-Performance DOT 3 and 4 Brake
High-temperature performance in auto/light-truck, high-performance,
racing and powersports applications. High-temperature stability, yet
flows easily at low temperatures. Helps keep water in suspension,
slowing its effects on the brake system. High boiling temperatures
ensure maximum life and reliable braking power.
Universal Power Steering Fluid
Synthetic Universal Power Steering Fluid provides excellent wear
protection. Its synthetic formulation delivers better lubricity and
reduced friction, resulting in cooler operating temperatures, longer
component life and quieter operation. AMSOIL Power Steering Fluid is
formulated with a high viscosity index. Its low pour point ensures
immediate lubrication at startup and in cold temperatures, yet it
resists thermal breakdown and maintains maximum protection in high
Engine Assembly Lube
Engine Assembly Lube (EAL) is formulated to cling to engine parts
and provide exceptional wear protection, while inhibiting rust and
corrosion in newly built or rebuilt four-stroke engines. It is
designed to dissolve in oil, helping eliminate oil port clogging and
Application and Cross Referance Guides
Order AMSOIL oil and lubricants today and start experiencing the benefits of the
best motor oil.
The AMSOIL Online
Product Application Guide gives
you fast, easy access to vehicle data.
Our Online Product Application Guide is an interactive tool that
provides you with comprehensive information for all your lubricant,
air and oil filtration needs.
No other company offers you this type of access to product
application information and ordering convenience! The
Filter Cross Reference guide
will return the corresponding AMSOIL, Donaldson, MANN, and WIX
filter(s) for any manufacturer filter number. AMSOIL provides
filters for both Car/Light truck, Motorcyles, Powersports, Small
Engine, Vintage, and Heavy Duty applications. Be sure to print
out your vehicle information and save in a convenient location for
future reference. Scan the code to go to the mobile version on the
Online Product Application Guide or go to mobile.syntheticoils.us
Products Should I Use? Ask Us Now...
Contact Jeff Fisher a Independent AMSOIL Dealer today at 866-292-4700 or by
e-mail to find out more about wholesale pricing, and get a savings of 20%-25% off retail on your AMSOIL purchases.