AMSOIL, the leader in synthetic lubrication,
produced the world’s first API-qualified synthetic motor oil in
1972. Trust the extensive experience of AMSOIL, The First in
Synthetics,® to do the best job protecting your motorcycle.
Harley-Davidson
Confirms To AMSOIL That The Use Of Synthetic Motor Oils Other Than
Harley-Davidson Oil Does Not Void Warranty Coverage -
HD Warranty
Addendum
AMSOIL
Recommendations for Harley-Davidson®
Motor Oils
AMSOIL Synthetic
20W-50 Motorcycle Oil is a premium oil designed for those who demand the
absolute best lubrication for their motorcycles. AMSOIL MCV is the
result of extensive research, and it is
specially formulated to excel in
all areas unique to motorcycles, including high temperatures of
air-cooled engines such as Harley Davidson® V-Twin, wet clutch
lubrication, extreme
pressure regions of gears and chains and rust common to short trips and
storage. AMSOIL MCV is multi-functional and fulfills the requirements of
both domestic and foreign motorcycles. It outperforms other conventional
and synthetic motorcycle oils.
more information
AMSOIL
Synthetic SAE 60 Motorcycle Oil (MCS) is a premium oil designed for
those who demand the absolute best lubrication for their motorcycles.
AMSOIL Motorcycle Oil is the result of extensive research, and it is
specially formulated to excel in all areas unique to motorcycles,
including high engine RPM, wet-clutch lubrication, extreme-pressure
regions of gears and rust common to short drives and storage.
AMSOIL SAE 60 Motorcycle Oil features superior
heat resistance and wear protection. It is shear-stable and helps
maintain proper oil pressure in elevated temperatures. AMSOIL
Synthetic SAE 60 Motorcycle Oil stops viscosity breakdown (loss),
protects gears and chains, and meets SAE 140, API GL-1 gear oil
requirements. It is multi-functional and fulfills the requirements
of both domestic and foreign motorcycles. AMSOIL SAE 60 Motorcycle
Oil outperforms other conventional and synthetic motorcycle oils.
more information
Transmission & Primary Drive
Fluids
AMSOIL V-Twin Synthetic Transmission Fluid is specifically designed
for bikers who prefer a dedicated transmission fluid over a
multi-use lubricant.
AMSOIL V-Twin Synthetic Transmission Fluid is
specifically designed for bikers who prefer a dedicated transmission
fluid over a multi-use lubricant. Its frictional properties deliver
smooth shifts and it helps quiet transmission noise, letting riders
focus on enjoying the ride. V-Twin Synthetic Transmission Fluid is
Warranty Secure™ and will not void your motorcycle’s warranty. It is
a cost-effective, high-performance alternative to original equipment
manufacturer (OEM) fluids.
more information
AMSOIL V-Twin Synthetic Primary Fluid is purpose-built for bikers
who prefer a dedicated primary chaincase lubricant. Its balanced
formulation delivers consistent clutch feel for confident takeoffs,
helping riders avoid killing the engine. It also protects components
against wear to help riders get the most out of their bikes. V-Twin
Synthetic Primary Fluid is Warranty Secure™ and will not void your
motorcycle's warranty. It is a cost-effective, high-performance
alternative to original equipment manufacturer (OEM) fluids.
more information
Motorcycle Oil Filters
The unique
construction and full-synthetic media of AMSOIL Ea Motorcycle Oil
Filters allow them to provide unmatched performance in motorcycles
and other PowerSports equipment. EaOM Filters last longer, stop
smaller dirt particles and offer less restriction than other
filters. Ea Motorcycle Oil Filters provide filtering efficiency of
98.7 percent at 15 microns, outperforming the best
cellulose/synthetic blend media on the market. For maximum
protection, AMSOIL recommends changing Ea Motorcycle Oil Filters at
every oil change.
AMSOIL Ea
Motorcycle Oil Filters provide unsurpassed protection for
motorcycles. AMSOIL currently provides 16
Ea Motorcycle Oil Filters manufactured for the most popular
PowerSports applications, eight of which are chrome plated.
Ea Motorcycle
Oil Filters feature a specially constructed silicone anti-drain back
valve and a nitrile sealing gasket to go along with the
full-synthetic Ea nanofiber media. The anti-drain back valve provides
excellent protection during startup and remains flexible in all
temperatures, and the nitrile sealing gasket resists chemical
breakdown, providing excellent durability and ensuring long filter
life.
more information
Chrome
Motorcycle Oil Filter
AMSOIL Ea Motorcycle Oil Filters are made with
premium-grade full synthetic media. Ea Motorcycle Oil Filters
feature advanced full synthetic nanofiber technology, making them
the highest efficiency filters available for the motorcycle market.
more information
Fogging Oil & Gasoline Stabilizer
Engine Fogging Oil
Two and
four-stroke motorcycles are commonly operated seasonally or
infrequently, and then stored for long periods of time. During these
periods of inactivity, and as a result of fluctuations in ambient
temperatures, water vapor can form condensate within the engine,
eventually becoming surface corrosion on cylinder liners, piston
rings, anti-friction bearings and steel/iron contact surfaces on
rotation seals.
AMSOIL Engine
Fogging Oil offers superior film retention, providing long-term
protection against corrosion and dry starts, extending engine life
and reducing operating expenses. Its aerosol
spray formulation offers easy and clean applications, while reaching
more components and offering better distribution than straight motor
oil.
more information
|
|
Gasoline Stabilizer
It is
difficult to drain all of the fuel from equipment before storage,
and doing so would expose the system to other problems, including
the formation of rust and corrosion on the bare metal in the tank
and fuel system and drying and cracking of gaskets and seals. Some
fuels are pre-treated with oxidation inhibitors that allow them to
be stored for short periods without forming excessive deposits,
while other fuels have no inhibitors at all.
AMSOIL
Gasoline Stabilizer extending engine life and reducing operating
reduces the oxidation process that occurs when fuel is stored for
extended periods. It prevents the formation of varnish and sludge
which can clog injectors, stick floats and cause poor engine
performance. AMSOIL Gasoline Stabilizer is ideal for stored
seasonal equipment such
as motorcycles, snowmobiles, lawnmowers and boats. The treat rate is
one ounce with every 2.5 gallons of fuel. One bottle treats 40
gallons.
more information
|
Fuel Additives
AMSOIL Quickshot SE
Quickshot SE is a premium fuel
additive formulated to thoroughly clean and restore peak performance.
For use in all two and four-stroke
gasoline-powered engines, including motorcycles, snowmobiles, boats,
personal watercraft, ATVs, edgers, tillers, mowers, snowblowers,
chainsaws, generators and farm and construction equipment . It also
stabilizes fuel between uses and during short-term storage periods.
Its revolutionary technology focuses on three major fuel-related
issues plaguing small engines and powersports equipment: ethanol,
water and dirty pump gas.
more information
|
|
Motorcycle Octane
Boost
AMSOIL
Motorcycle Octane Boost (MOB) increases octane for power and
efficiency. It is designed to improve startup performance and
eliminate engine ping and knock for increased power at low-rpm
operation. Motorcycle Octane Boost contains detergents that help
combustion chambers and fuel delivery systems maintain
cleanliness for optimum performance. At the recommended treat
rate, it does not harm catalytic converters or oxygen sensors
and is compatible with all other AMSOIL fuel additives.
more information
|
Maintenance & Accessory Products
Shock Therapy
Suspension Fluid #5 Light
Formulated
for fade-free dampening and smooth rebounds in racing and recreational
applications. Controls friction and heat, reduces wear, scuffing,
frictional energy loss and heat buildup and prevents fade more
effectively than conventional suspension fluids. Ideal STL for both
front forks and shocks.
Also available in #10 viscosity.
more information
MP Metal Protector
High-Performance
Spray-On Metal Surface Protectant
Displaces water and protects metal surfaces
from rust and corrosion. Provides a light film that prevents
metal-to-metal contact. Excellent for use on guns, hinges, squeaky
mechanical objects, electrical systems and more. Penetrates existing
rust buildup. Also dries wet electrical systems.
more information
Heavy Duty Metal
Protector
Made
with special rust and corrosion inhibitors. Excellent on metal surfaces,
leaves a long-lasting protective coating. Protects against the effects
of salt, moisture & chemical corrosion. Works as an undercoat, leaving a
wax-like film. Recommended for motorcycle chains. Won’t “sling-off”. Dry
to the touch.
more information
Chain Lube
AMSOIL Chain Lube is a
dedicated aerosol chain lubricant that provides outstanding
wear and corrosion protection for all types of chains and
sprockets. It penetrates deep into the pins and bushings of
chains and leaves a protective coating that will not fling
off or attract dirt, dust, sand or grit.
more information
Series 2000 Racing
Grease
Exceptional
High-Speed/High-Temperature Performance
AMSOIL DOMINATOR® Synthetic Racing Grease is
engineered to protect high-performance bearings and chassis
components in racing applications operated on snow, dirt, water or
track. It provides superior protection for bearings operating under
high-speed, high-heat and heavy-load conditions.
more information
Multi-Purpose Grease
The correct
consistency grade of AMSOIL Synthetic Multi-Purpose Grease is
recommended in heavy and light duty applications found in
manufacturing plants, automobiles, agricultural and construction
equipment.
These include,
but are not limited to, roller bearings, plain bearings, thrust
bearings, gears, electric motors, presses, winches, bushings, wheel
bearings, chassis lubrication, universal joints, ball joints,
tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose
Greases are suitable for use up to 350 degrees F. When operating at
elevated temperatures, frequent regreasing may be required.
more information
Power Foam
Carburetor
and Induction System Cleaner for Two - and Four-Stroke Gasoline Engines
Improves engine performance by removing gum,
varnish and carbon deposits that affect power, operation, idle and
fuel economy. Power Foam cleans intake valves, intake manifolds and
throttle plates to keep the combustion intake system running at peak
efficiency. Helps reduce engine ping and keeps carburetors and
injector systems operating like new.
more information
Heavy-Duty Degreaser
Fast-Acting Equipment and Surface
Degreaser
AMSOIL Heavy-Duty Degreaser is
formulated with powerful and fast-acting solvents, attacking
petroleum-based grime on a molecular level to loosen its
hold on metal, concrete, engines and other surfaces. Its
active citrus formula makes cleaning easy and leaves a clean
scent.
more information
Silicon Spray
Perfect for
lubricating non-metallic surfaces that come into contact with metal,
nylon, cardboard, fiberglass, wood or plastic surfaces. Use anywhere
a light-duty or silicone lubricant is required. Special non-staining
formula. USDA H-1 rated for incidental contact with food. Excellent
for waterproofing leather boots, shoes, jackets, suede, etc.
more information
Miracle Wash Waterless Wash & Wax
Miracle Wash Waterless Wash & Wax is a unique dry car wash and wax
that delivers outstanding performance and quick, easy and economical
application. No water is required; specially formulated surfactants
lift dirt and other particles from the surface and hold them in
suspension. Miracle Wash then acts as a shield, protecting the
surface from abrasion while you wipe the dirt clean.
more information
Series 500 High-Performance DOT 3 and 4 Brake
Fluids
High-temperature performance in auto/light-truck, high-performance,
racing and powersports applications. High-temperature stability, yet
flows easily at low temperatures. Helps keep water in suspension,
slowing its effects on the brake system. High boiling temperatures
ensure maximum life and reliable braking power.
DOT
3
more information
DOT 4
more information
Engine Assembly Lube
AMSOIL
Engine Assembly Lube (EAL) is formulated to cling to engine parts
and provide exceptional wear protection, while inhibiting rust and
corrosion in newly built or rebuilt four-stroke engines. It is
designed to dissolve in oil, helping eliminate oil port clogging and
deposit formation.
more information
Motorcycle Dip Dots
Collectible self adhesive AMSOIL motorcycle dip
dot oil cap covers are available in flat and domed styles. 1 1/2
flat, 1 1/2 domed, 1 1/8 flat
|