What makes AMSOIL synthetic motor oils so good? The molecular uniformity and purity of synthetic oils allows them to protect and lubricate engines better and more efficiently than conventional oils in all operating conditions. Synthetics lubricate and protect quickly in cold temperatures, maintain a dependable lubricating film in normal operating temperatures and shield moving parts from damage and wear during high-stress, high-temperature operations. AMSOIL synthetic motor oils exceed the most demanding world-wide performance standards and meet warranty requirements for all domestic and imported motor vehicle engines.

To see a larger image click on it

The NOACK Volatility Test determines the evaporation loss of lubricants in high-temperature service. The more motor oils vaporize, the thicker and heavier they become, contributing to poor circulation, reduced fuel economy and increased oil consumption, wear and emissions.

High Performance Oils

AMSOIL High Performance Synthetic Motor Oils are specially formulated to operate in high-tempera­ture/high-stress engines, such as those in sport utility vehicles, motor homes, pickup trucks and diesel-pow­ered passenger vehicles.

AMSOIL High Performance Synthetic Motor Oils provide maximum TBN and dispersant protection to control acid and soot in diesel engines. They also provide high levels of key anti-wear chemistries and have outstanding ability to maintain a dependable lubricating film of protection in stressful operating conditions – like those experienced by sport utility vehicles, motor homes and pickup trucks.

Special synthetic base stock blends and advanced additive packages found only in AMSOIL Series 2000 synthetic motor oils provide up to two times the wear protection of other motor oils. AMSOIL Series 2000 synthetic motor oils reduce friction for quicker engine response, increased horsepower and improved fuel efficiency

more information           

Premium Protection Motor Oils

AMSOIL Synthetic Motorcycle Oils are premium oils designed for those who demand the absolute best lubrication for their motorcycles. They are specially formulated to excel in all areas unique to motorcy­cles, including high engine RPM, wet clutch lubrica­tion, high temperatures, extreme pressure regions of gears and chains and rust common to short trips and storage.

XL Motor Oils

AMSOIL XL Synthetic Motor Oils are made to deliver 7,500 miles or six months of service between oil changes (or longer when relying on factory-installed oil monitoring systems such as used on GM and some European vehicles) These oils provide outstanding wear protection and increased power, performance and fuel economy in high and low temperatures.

AMSOIL Ea Oil Filters have the best efficiency rating in the industry. They also have significantly lower restriction than conventional cellulose media filters. The small synthetic nanofibers in AMSOIL Ea Oil Filters trap smaller particles and hold more contami­nants, resulting in lower restriction. During the engine warm-up period, an Ea Oil Filter allows the oil to flow through the filter at a colder temperature than a typical cellulose filter. The additional filtering time decreases engine wear. AMSOIL Ea Oil Filters are guaranteed for 25,000 miles or one year, whichever comes first, when used in conjunction with AMSOIL synthetic motor oil.

more information           

To see a larger image click on it

AMSOIL Ea Air Filters’ synthetic nanofiber media removes five times more dust than traditional cellu­lose filter media alone and 50 times more dust than wet gauze filter media. AMSOIL Ea Air Filters pro­vide superior efficiency, better air flow and more capacity, and they are cleanable for long life. AMSOIL Ea Air Filters are guaranteed for 100,000 miles or four years, whichever comes first. They remain effective for 25,000 miles or one year before requiring cleaning.

more information           

To see a larger image click on it

The Ea By-Pass Oil Filter provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by fil­tering oil on a “partial-flow” basis. It draws   approxi­mately 10 percent of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea By-Pass Filter utilizes a new high-effi­ciency by-pass filter element that is also a soot removal device. These filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the Ea By-Pass Filter is used in conjunction with a standard full-flow filter.

more information 

See all the By-Pass Kits & Accessories

AMSOIL Dual Remote Oil Filtration

The AMSOIL Dual Remote Oil Filtration System (BMK-23) combines the AMSOIL Ea Oil Filter and the Ea By-Pass Filter on a single mount that may be placed any­where space allows in the engine compartment, for ease of serviceability. 

The Dual remote system increases the circulating oil volume in the engine. That helps the oil stay cleaner and last longer, and it helps regulate  engine temperature, which promotes engine life.

more information 

To see a larger image click on it

Universal Automatic Transmission Fluid

AMSOIL Synthetic ATF works as a powerful friction reducer, saving fuel and maximizing performance. AMSOIL Syn­thetic ATF’s tough, durable lubricating film and anti-wear additives protect com­ponents from wear-promoting contact, even during high load operations.

All-Season Performance 

AMSOIL Synthetic ATF not only performs under extreme hot and cold conditions, it inhibits excessive heat buildup, enhancing performance and prolonging component life.

AMSOIL ATF helps prevent component overheating and ensures cooler, smoother transmission operation.

Smooth Shift Performance

AMSOIL ATF provides smooth shifting and long, trouble-free transmission life. In addition, the anti-wear additive package makes AMSOIL ATF an excellent lubricant in other hydraulic systems.

• Resists Oxidation and
  Thermal Degradation

• Provides All-Season Protection

• Anti-Wear Protection

• Extended Drain Intervals

• Outstanding Performance in Transmissions, Power Steering and Hydraulic Applications

Promotes Cleanliness

AMSOIL ATF is two times more oxidation resistant than conventional transmission fluids, even under the toughest heavy towing and high temperature conditions. It protects clutches, planetary gears, valves, pumps and seals from damaging sludge and varnish deposits. AMSOIL ATF helps to keep components clean, ensur­ing long life and top performance. 

more information

To see a larger image click on it

Low Viscosity Universal Automatic Transmission Fluid

AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid (ATL) is engineered to exceed the requirements of GM, Ford and Toyota where low-viscosity oil is required. The highly-specialized properties of this light-bodied fluid provide outstanding performance without compromising protection, even in severe operating conditions

Fully Fortified

• Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function

Exceptional Hot and Cold Temperature Performance

Thermal Stability – Hot temperatures are no excuse for poor reliability. Naturally heat-resistant and heavily fortified with anti-oxidants, AMSOIL Low- Viscosity Automatic Transmission Fluid exceeds the most demanding oxidation requirements. It delivers outstanding protection against sludge and varnish deposits that clog narrow oil passages and contribute to clutch glazing. AMSOIL Low-Viscosity ATF protects hot-running transmissions. 

Cold-Temperature Fluidity – Cold, thick automatic transmission fluid lengthens shift times and reduces energy efficiency (fuel economy). AMSOIL Synthetic Low-Viscosity ATF is wax-free and delivers extraordinary cold-flow performance (<-60°F pour point). It helps improve shifting response and energy efficiency while reducing warm-up times. 

Extended Fluid Service Life

Most drivers are unaware that transmissions commonly operate under severe service and require shorter fluid drain intervals. AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is a long-life fluid capable of extended service intervals. Drivers can count on AMSOIL Low-Viscosity ATF to provide protection beyond conventional fluids.

more information

Power and Fuel Economy

Low-friction AMSOIL synthetic gear lubes maximize power output and minimize heat buildup. This means less energy spent on friction, and more used for maximum four-wheel drive power and top fuel economy.

Load Protection

AMSOIL synthetic gear lubes bear the brunt of high-load stress so gears don’t. AMSOIL synthetic gear lubes’ naturally high film strength and tough extreme-pressure agents shield components from premature wear.

All-Season Performance

AMSOIL synthetic gear lubes have a high viscosity index rating. That means they won’t become waxy in low temperatures and they’ll remain viscous enough to protect engines in extreme heat.

Clean Running

Stable even in extreme heat, AMSOIL synthetic gear lubes resist oxidation and thermal break­down, helping gears stay free of sludge and other deposits.

80W-90 Synthetic Gear Lube

AMSOIL 80W-90 Synthetic Gear Lube is a multi-functional product designed to surpass the requirements of equipment and automotive applications calling for an SAE 80W-90 viscosity grade. Formulated with wax-free synthetic base oils and high-quality additives, AMSOIL 80W-90 Synthetic Gear Lube resists thermal breakdown. Its naturally high viscosity index and shear stable construction improves film strength and viscosity retention. AMSOIL Synthetic 80W-90 Gear Lube prevents wear, resists heat and protects gears. It last longer in service than conventional gear oils and increases equipment life.

more information           

Slip-Lock™ Differential Additive

Formulated with advanced friction modifier. Designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, posi-traction and locking differentials. Formulated for use with both synthetic and petroleum gear lubricants and safely replaces manufacturer-recommended friction modifiers

more information           

Severe Gear EP Gear Lube

AMSOIL Severe Gear Synthetic Extreme Pressure (EP) Lubricants (SVO, SVT, & SVG) are premium grade lubricants specifically engineered for maximum performance in severe duty applications. Severe Gear features an exclusive blend of high viscosity, shear-stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. AMSOIL Severe Gear lubricants are designed to provide better performance and excellent protection during temperature extremes.

75W-90           more information

75W-110         more information

75W-140         more information

AMSOIL Synthetic Greases

AMSOIL synthetic greases are formulated for component lubrication and protection in normal and high-stress automotive conditions, such as high speeds, high temperatures, heavy loads and wet applications. All are synthetic based lithium complex greases forti­fied with extreme pressure, anti-rust and anti-corrosion chemistries and all are capable of extended service lives. AMSOIL Series 2000 Synthetic Racing Grease is specially formulated for severe, high-speed/high-temperature racing conditions. AMSOIL Multi-Purpose Grease is made for day-to-day high-speed/high-temperature automotive applications. AMSOIL Polymeric Truck, Chassis and Equipment Grease delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium- and heavy-duty applications. AMSOIL Water Resistant Grease is specially formulated for extra water washout resistance and protection of components against the degrading effects of water, such as rust.  

more information

Racing Grease

more information

Multi-Purpose

more information

Polymeric

more information

Water Resistant

Pi Performance Improver

AMSOIL Pi Performance Improver (API) is the most potent gasoline additive available today. As a concentrated deter­gent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits, eliminating the need for expensive fuel injec­tor cleaning procedures. It is ideal for use prior to emissions inspections, and it helps maintain peak engine efficiency, fuel economy, power and dri­vability in newer low mileage engines. In engines with accumulated deposits, PI provides improved fuel mileage up to 5.7%, reduced emissions, restored power and performance, reduced need for higher octane fuel, reduced carbon rap and pre-ignition, better drivability and smoother operation after only one tank of gasoline.

     more information

Series 2000 Octane Boost

Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Increases octane number up to seven points. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use. 

• Improves performance
• Maximizes power
• Improves ignition
• Helps fuel burn cleaner
• Removes carbon deposits
• Reduces engine knock
• Improves responsiveness

more information           

The AMSOIL Online Product Application Guide gives you fast, easy access to more than 20 years of vehicle  data. Our Online Product Application Guide is an interactive tool that provides you with comprehensive information for all your lubricant, air and oil filtration, spark plug, wire set, and wiper blade needs. No other company offers you this type of access to product application information and ordering convenience!

Be sure to print out your vehicle information and save in a convenient location for future reference.